FOCUS Enhancements FOCUS FireStore FS-4 Pro - Manual (Page 98)

FS Functions
82 FS-4 HD and FS-4Pro HD Portable DTE Recorders
Repair Disk
Use this function if a recording session does not complete
properly and there is a question that the file may be damaged.
For example, recording terminates due to a loss of power to the
FS-4 HD. Repair Disk scans the entire disk drive checking for
and repairing file errors and incomplete files. When the file is
repaired it is can be used in the NLE system.
To repair a disk:
1.
From the Utilities screen, go to
Repair Disk
.
2.
Select
YES
and the FS-4 HD begins repairing the disk.
A status screen displays the progress of disk repair and at
completion displays the message:
•
Complete
indicating Repair Disk was successful.
•
Aborted
indicating that there were errors and the repair
did not complete.
3.
Press
BACK
to return to the
Utilities
screen.
Corrupted Files May Need More Repairs
After running Repair Disk some files may still need further work to restore
them. In such a case, run the utility Repair Clip, refer to the following page.
After Using REPAIR DISK Move Content and Re-Format
After using the REPAIR DISK utility, the content must be moved from the
FS-4 HD's drive and the FS utility FORMAT run before resuming recording.
Refer to
Format Disk on page 81.
REPAIR DISK
PRESS YES TO
REPAIR DISK
YES BACK