Fisher-Price 3-IN-1 HIGH CHAIR TO BOOSTER P6028 - Manual (Page 4)

4
Bracket Installation Instructions
Seat Support
• Push to align the hole in the right bracket with the
hole in the seat support.
• Insert a #8 x 3 /
4
" (1,9 cm) screw (provided in
this kit) through the right bracket and into the seat
support. Tighten the screw with a Phillips screw-
driver. Do not over-tighten.
Bracket installation is now complete.
• For your convenience this kit includes extra screws
(just in case you misplace the screws removed in
step 3). If after assembling the brackets you have
extra screws, dispose of them in the garbage.
7
8
Right Bracket
#8 x 3 /
4
" (1,9 cm)
Screw
• Push to align the hole in the left bracket with the
hole in the seat support.
• Insert a #8 x 3 /
4
" (1,9 cm) screw (provided in
this kit) through the left bracket and into the seat
support. Tighten the screw with a Phillips screw-
driver. Do not over-tighten.
5
#8 x 3 /
4
" (1,9 cm)
Screw
Left Bracket
Seat Support
• First, fit the slot on the right bracket (labeled 2)
onto the seat support tube closest to you A .
• Then, slide the right bracket completely onto the
seat support B .
Hint: The brackets are designed to fit each side of
the seat support one way.
6
Right Bracket
Seat Support
Tube
Seat Support
B
A