Field Controls Clearwave Water Conditioner CW-HD-2 - Manual (Page 5)

Page 5
OPERATION TIMETABLE FOR THE CLEARWAVE™
The following timetable of events should be used to evaluate the operation of the ClearWave™ during the
180-day customer satisfaction period. This is the best way to evaluate the ClearWave™ operation and
benefits the ClearWave™ technology can provide for you and your home. Please note testing for
changes in hardness with current testing practices will not show you if the ClearWave™ is working. The
current practice of determining water hardness is the measurement of the concentration of calcium and
magnesium in the water. Since the ClearWave™ does not remove any calcium or magnesium ions from
the water, testing the water before and after the installation of the ClearWave™ will not show any change.
DAY 1: ........................................ The ClearWave™ action immediately starts to loosen existing scale in
both the hot and cold water systems. One should find soap lathers more easily.
DAY 5 and onwards: .................. Scale begins to break down and come off water heater elements
(immersion heaters) and tanks. Most particles are microscopic and will flow through your water system,
but some small particles may be seen in the water coming from the hot water tap.
DAY 10 to 16: ............................. It should be noticeably easier to wipe clean ceramic, plastic, glass, and
metal surfaces. By now the quantity of bath soap, dish soap, laundry detergent, and laundry softening
agents can be reduced. Scale should have loosened on faucet, showerheads and frequently used
appliances that boil water (such as coffee makers).
DAY 16 and onwards: ................ Scale should continue to loosen from faucet, showerheads, and pipes.
With the continuing break down and reduction of scale from the heating surfaces of water heaters, water
should heat up quicker using less energy to achieve the desired temperature.
After 1 to 2 months: .................... Any scaly crust or stains in toilets or under faucet should be significantly
reduced. No new stains or crust should form. Mold that attaches to scale will begin to disappear from
shower curtains and once cleaned should not reappear. Depending on the water hardness in the area,
the full affects can take up to 12 weeks, especially if the system has been heavily scaled up over many
years.
N OTES :
1) If iron is present in the water supply, use an iron filter prior to the ClearWave™.
2) Depending on water hardness or water make-up, two CW-HD-2 units may be required.
3) The CW-HD-2 can be used on water up to 25 grains of hardness. If over 25 grains, it can be
used to aid the operation of a water softener.
M ANUFACTURERS ’ W ARRANTY :
The ClearWave
™
unit is guaranteed for 18 months from the date of the original purchase against defects
in workmanship and material. During that period these defects will be repaired or the unit will be replaced
without charge at manufacturers option. *This guarantee covers normal consumer usage but excludes
damage caused by alteration, accident, misuse, abuse, neglect, installation, or normal wear and tear.
Should your unit fail within the unit guarantee period, please pack it carefully in the original box and return
it to your supplier. This guarantee does not affect your statutory rights. Please return the guarantee at the
end of this manual, to register your purchase.
S ATISFACTION G UARANTEED :
In the unlikely event you are not satisfied with the performance of the ClearWave™ Water Conditioner it
should be returned with the receipt to the point of purchase (complete), and within 180 days of the original
purchase date. It should be packed in the original, box and is subject to the: * Terms and Conditions of
the manufacturers’ warranty.