Freecom Technologies RCS-M1000U - Manual (Page 13)

OPERATION (contd.)
Dehumidifying
WARNING: DO NOT use Exhaust Duct Kit when operating as a dehumidifier.
1. Plug power cord into a standard household outlet. Use this product only with the
proper electrical voltage.
WARNING: Do not plug this appliance into an outlet that is being used by other
appliances or electrical devices. When installing the electrical plug into the outlet,
never touch or bend the metal prongs and always push plug into outlet by using the
molded plug. Never use the electrical plug to start or stop the unit and avoid pulling,
folding, or stretching the electrical cord.
2. Press “POWER ON/OFF” button on control panel. The unit will power up
and air will begin blowing from the front louvers.
3. Press “AIR VOLUME” button on control panel to choose
“DEHUMID.”
4. If desired, press “TIMER” button on control panel to program
the dehumidifier to turn off in either 1, 2, or 3 hours.
5. To turn unit off manually, press “POWER ON/OFF” button.
Unplug power cord from outlet when not in use.
10