FORD F-150 K8285 - Manual (Page 10)

K8285a-0920 10
• Align the hole in the steering wheel with the hole in the
steering column.
• Insert the .25" x 2.85" pin all the way through the hole in the side
of the steering wheel and into the steering column, as shown.
6
• “Snap” the steering wheel cover onto the steering wheel.
Hint: If the steering wheel cover does not "snap" onto the steering
wheel, you have not properly assembled the steering column to the
steering wheel. Remove the pin and the steering column from the
steering wheel and refer back to Assembly steps 5 and 6.
7
• Insert the end of the steering column down through the opening in
the dash and down through the hole in the vehicle floor.
Hint: You may need to turn the steering column to fit it through
both openings.
• Press the steering wheel down to "snap" into place.
.25" x 2.85" Pin
Steering Column
PRESS
Steering Wheel Cover
9
8