Franklin FBC20 - Manual (Page 5)

Technical Specifications
Model Number FBC20
Description Refrigerated outdoor beverage cart
Electrical Input 115VAC ~ 60Hz
Current Rating 1.2A
Capacity 3.04 ft
3
(86 liters)
Unit Dimensions
33.5”W* x 16.9”D x 35.2”H
* with handles attached and doors closed
Inside Temperature Range 32ºF - 41ºF
Ambient Temperature Range 50ºF - 109ºF
Refrigerant R134A
Assembly
1. On the bottom of the unit, screw the two locking casters into place below the Front, and
the two non-locking casters below the Rear of the unit. NOTE: Do not invert the unit or
lay it on its side. Just tilt it to attach the wheels. If unit is inverted or laid on its side, you
must let it stand upright for at least 24 hours before plugging it in.
2. Put the two sliding windows into place on top.
3. To install the top doors, first find the four metallic pins stored inside the unit. Insert one
pin into each of the door brackets on the upper edge of the unit, two on each side.
4
Front of cart
Locking casters (2)
Door 2
Door 1
Drain plug
(on side of unit)
3 hanging food
baskets
(inside unit)
Sliding windows
Handle-holder
Handle
Power ON light and Thermostat
Exhaust grill
Power cord compartment
Non-locking casters (2)