Furuno FAR-2XX7 - Manual (Page 4)

4
This manual is printed with
soy ink.
P U B . N O . O S E - 3 5 1 9 0 - A
<ARP OPERATION>
Activating, Deactivating ARP
1. Choose the ARP ACQ MODE box.
2. Push the left button to show OFF, MAN or
AUTO MAN as appropriate.
Automatic Acquisition
1. Choose the ARP ACQ MODE box and
then push the right button.
2. Choose 1 ARP SELECT and then push
the wheel or the left button.
3. Choose automatic acquisition condition
desired and then push the wheel or the left
button.
4. Push the right button to close the menu.
Manual Acquisition
1. With the cursor inside the effective display
area, roll the wheel to show “ACQ” in the
guidance box.
2. Place the cursor on the target you want to
acquire.
3. Push the left button to acquire the target.
Terminating Tracking of
Targets
1. With the cursor inside the effective display
area, roll the wheel to show “TARGET
CANCEL / EXIT” in the guidance box.
2. Place the cursor on the ARP target or
reference target to cancel tracking.
3. Push the left button or the wheel.
4. To finish, push the right button.
Displaying Target Data
1. With cursor inside the effective display
area, roll the wheel to show “TARGET
DATA & ACQ / CURSOR MENU” in the
guidance box.
2. Roll the trackball to place the cursor on a
desired ARP target and then push the left
button.
Adjusting Symbol Brilliance
1. Choose the BRILL box and then push the
right button.
2. Choose 0 NEXT and then push the wheel
or the left button.
[BRILL1 MENU (2/2)]
1 BACK
2 BRG CURSOR
3 EBL
4 VRM
5 INDEX LINE
6 ARP SYMBOL
7 AIS SYMBOL
8 L/L GRID
9 MARK
0 CHART
3. Choose 6 ARP SYMBOL and then push
the wheel or the left button.
4. Roll the wheel to adjust brilliance.
5. Push the right button twice to close the
menu.
Vector Motion and Length
1. Choose VECTOR TRUE or VECTOR REL
(whichever is displayed) at the right side of
the screen.
2. Push the left button to display VECTOR
TRUE or VECTOR REL as appropriate.
3. Choose the vector time box.
4. Push the left button to display time
desired.
CPA and TCPA Alarm Ranges
1. Choose the CPA LIMIT box.
2. Roll the wheel to choose the CPA value
desired and then push the wheel.
3. Choose the TCPA limit box.
4. Roll the wheel to choose TCPA value
desired and then push the wheel.
( 0 5 0 2 , D A M I ) F A R - 2 1 0 7 / 2 8 0 7 S E R I E S