FMI COMFORT FLAME CGCFTNA - Manual (Page 28)

www.fmiproducts.com 124978-01B 28
seRVICe HINTs
When Gas Pressure Is Too Low
• pilot will not stay lit
• burner will have delayed ignition
• fireplace will not produce specified heat
• propane/LP gas supply may be low (pro-
pane/LP only)
You may feel your gas pressure is too low. If
so, contact your local propane/LP or natural
gas supplier.
TeCHNICAl seRVICe
You may have further questions about
installation, operation, or troubleshooting.
If so, contact FMI PRODUCTS, LLC at
1-866-328-4537. When calling please have
your model and serial numbers of your
heater ready.
You can also visit our web site at
www.fmiproducts.com.
RePlACeMeNT PARTs
If this product is missing a part or has a broken
component, please do not return it to the store.
Call FMI PRODUCTS, LLC at 1-866-328-4537
to answer questions and replace parts under
warranty.
Note: Use only original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
When calling, have ready:
• your name
• your address
• model and serial numbers of your heater
• how heater was malfunctioning
• purchase date
CGCFTPA
• Rating (Variable): 14,000/26,000 Btu/Hr
• Gas Type: Propane/LP Gas Only
• Ignition: Piezo
• Pressure Regulator Setting: 8" W.C.
• Inlet Gas Pressure (in. of water):
Maximum - 14" W.C., Minimum* - 11" W.C.
* For purposes of input adjustment
For Both Models
• Dimensions (H x W x D) (including hood and screws):
Fireplace - 25
7 /
8
" x 26 13 /
16
" x 9 3 /
8
", Carton - 32 5 /
8
" x 27 3 /
16
" x 11 5 /
8
"
• Weight: Fireplace - 44.5 lbs., Shipping - 48 lbs.
sPeCIFICATIoNs
CGCFTNA
• Rating (Variable): 14,000/26,000 Btu/Hr
• Gas Type: Natural Gas Only
• Ignition: Piezo
• Pressure Regulator Setting: 3" W.C.
• Inlet Gas Pressure (in. of water):
Maximum - 10.5" W.C., Minimum* - 5" W.C.
* For purposes of input adjustment