Wx-150 menu tree, Menu, Using the alarm clock – First Alert WX-150 User Manual
Page 10
10
WX-150 Menu Tree
Normal Operation
Press and hold for 3 seconds
MENU
Voice or Siren
ON or OFF
ON or OFF
Time of day
Time of day
Day, month year & time of day
Volume setting from 1 to 8
Siren test
Add new events (1-5)
Turn siren OFF or ON for alerts
Set FIPS/SAME codes
Set WB channels 1-7
SET CHANNEL
COUNTY CODE
SIREN MODE
ADD ALERTS
SIREN TEST
SIREN VOLUME
SET DATE TIME
SET ALARM1
SET ALARM2
SET KEYTONE
SET BACKLIGHT
ALERT MODE
23
Appendix A - Notes and Tips
Self Test : The WX-150 will automatically notify you if it has not received a test message
in the previous 10 days, by lighting the amber “Advisory” LED indicator and displaying
“10 DAY ALERT SENTRY” on the LCD screen.
CAUTION!
Storm front activity can continue even though the alert’s effective time has expired. The
end of an alert does not mean that the related emergency is over.
Antennas: For best Weather Band reception, lift up the built-in telescopic antenna and
fully extend it vertically. The Weather Band channel that gives you the best reception may
not be the one that broadcasts weather information for your own location or county. To
improve reception move the radio location.
To Review Alert Messages
The WX-150 will store up to 17 alert messages in its memory. Alerts are removed
automatically when the time for the event expires. If all stored alerts are active, it will
replace the oldest active alert upon exceeding the memory limit. Press the NEXT (>) or
PREV (<) button to view stored alerts.
Using the Alarm Clock
The WX-150 has 2 alarm settings. To set the time refer to the Setting the ALarm Clock
section on page 19. To activate the alarms:
Press and hold the ALARM button for 3 seconds.
The icon and time setting for Alarm1 will be displayed on the screen. Pressing the ALARM
button will cycle through the alarm options as follows:
The alarm is activated for the icons shown. After selecting the desired alarm settings,
press SAVE button to save and exit to normal operation.
SET ALARM 1
ALARM OFF
SET ALARM 2
SET ALARM 1&2