FUJITSU IMAGE FI-5530C2 - Manual (Page 51)

1.5 How to Use ScandAll PRO
fi-5530C2 Image Scanner Operator’s Guide
35
B
A
S
IC SCANNE
R OP
ERA
T
IONS
1
[Show TWAIN dialog before each batch scan process] Checkbox
Marking this checkbox displays the setup dialog box at a scan when the TWAIN driver
is used for scanning.
(* When FUJITSU ISIS Scanner Driver is used, this checkbox is not available.)
4) Click the [Scanner Setting] button.
⇒ The scanner driver setup dialog box appears.
5) Configure various settings for scanning documents.
For more details about the settings, refer to section "1.4 How to Use Scanner Drivers"
on page 12 .
6) When you finished setting, click the [OK] button in the dialog box (FUJITSU TWAIN 32
Scanner Driver/ FUJITSU ISIS Scanner Driver).
⇒ You are returned to the [Scan Setting] dialog box.
7) Click the [Scan] button.
FUJITSU TWAIN 32 FUJITSU ISIS