Troubleshooting, 98 en, Frequently asked questions – FUNAI ZV457MG9 User Manual

Page 100

Advertising
background image

98

EN

TROUBLESHOOTING

Symptom

Remedy

VCR

There is no picture.

• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /

HDMI OUT jack, connect it to AUDIO / VIDEO OUT jack instead.

Picture noise appears.

• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”

(page 5).

• Adjust tracking control for better picture by pressing [CHANNEL / ]

while you are playing back a cassette tape.

The cassette tape does not play back.

• No cassette tape is inserted.

Recording does not start after you press
[REC I].

• Make sure the cassette tape has an erase-protection tab when you

record to a cassette tape. If needed, cover the hole with cellophane
tape.

The remote control does not function.

• Check if a cassette tape is in this unit.

The motor rotates even when
playback / recording is stopped.

• The motor may rotate for the duration of approximately 5 minutes for

efficient operation. This is not a malfunction.

Frequently Asked Questions

– Can I record to CD-RW/-R?

No, this unit records only DVD.

– Can I play back DVD-video that is bought in another

country?

Possible when the region code of the disc is 1 and All.

– Can I connect the unit to my PC?

No, you cannot control the unit by PC.

– Can I program a timer recording with cable/satellite

box?

Yes, you can. Select “L1” or “L2” as your recording channel,
and leave the cable / satellite box on (pages 17, 42-45).

– Can I record one channel while watching another

channel using a cable / satellite box?

It depends on your connection configurations. For more
details, please kindly contact your cable / satellite provider.

– Can I connect this unit directly to a TV which only has

an antenna in jack using an RF coaxial cable?

No. You need an RF modulator (commercially available)
to connect this unit to a TV which only has an antenna in
jack (page 16). This unit does not have an RF modulator.

– Can I change the channels on the cable / satellite box

using the remote control of this unit?

No. Changing the channels on the cable / satellite box using
this unit’s remote control is not possible. You need to use
the remote control supplied with the cable / satellite box to
change the channels on the cable / satellite box.

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT

IN

COAXIAL

L

R

L

Y

P

B

/C

B

P

R

/C

R

R

L

R

S-VIDEO

IN --- AUDIO --- OUT

IN --- VIDEO --- OUT

COMPONENT

VIDEO OUT

DVD/VCR

HDMI OUT

OUT

IN

ANTENNA

1

2

4

5

3

6

Note for Output Jacks on the Rear Panel

✔ : Available

: Not available

Available for

DVD mode

VCR mode

Output Jacks

1

HDMI OUT

2

COAXIAL DIGITAL AUDIO OUT

3

AUDIO OUT

4

S-VIDEO OUT

5

COMPONENT VIDEO OUT - interlace

5

COMPONENT VIDEO OUT - progressive

6

AUDIO/VIDEO OUT

E9M81UD_ZV457MG9.indd 98

E9M81UD_ZV457MG9.indd 98

2008/05/15 14:32:12

2008/05/15 14:32:12

Advertising