Furuno FR-8111 - Manual (Page 23)

1 – 7
1.5 Menu Overview
The MAIN menu, composed of nine menus, con-
tains functions which normally do not require fre-
quent adjustment in everyday operation.
Basic menu operation
1) Press the MENU key to display the MAIN
menu.
MAIN
Sel Item by VRM & hit ENT.
TRAIL ECHO
TRAIL
GUARD GUARD
ALARM
PLOT PLOT
SYMBOL
MARK&
DATA
FUNC3
FUNCTION
ECHO
SIG
A/C AUTO
MARK
TIME
ALM AUDIO
OFF
BRILL
INITIAL
Cursor circumscribes current selection.
You can select a menu by using the cur-
sor or (in most cases) pressing appropriate
key on the control panel. To select the
PLOT menu, for example, select PLOT
and press the
ENTER/SELECT key or
press the PLOT SYMBOL key.
Figure 1-5 MAIN menu
2) Operate the VRM or EBL control to select a
menu with the cursor and press the ENTER/
SELECT key. (You can also select menus by
pressing key or control shown on the MAIN
menu. In this case you need not press the EN-
TER/SELECT key.)
For example, select the TRAIL menu.
TRAIL
Sel Item by VRM & hit ENT.
TIME
CONT
MODE
TRUE
TONE
MULT
Current setting
15S
30S
1M
3M
6M
15M
30M
CONT
Options
of menu
selected
appear
here.
Cursor
Figure 1-6 TRAIL menu
3) Select option (in far right-hand column) by
operating the VRM or EBL control.
4) Press the ENTER/SELECT key to register se-
lection.
5) Press the MENU key to close the menu.
Changing pages on the INITIAL menu
The initial menu has two pages: INITIAL1 and
INITIAL2. You can switch between them as fol-
lows:
Previous page: Place the cursor on [
↑
] and press
the ENTER/SELECT key.
Next page: Place the cursor on [
↓
] and press the
ENTER/SELECT key.