Frymaster PASTAMAGIC 8196692 User Manual

Page 13

Advertising
background image

1-10

Remove these four screws.

Remove screws along the top edge of

control panel and dismount the panel.

Remove these

screws (on both

sides) and remove

backsplash and

topcap.

Remove these screws to release

the pots from the standoff brackets.

Remove the top

connecting strip.

8. If removing the cookpot, disconnect the enrichment tubes and gas supply tubes from the burner

assemblies. Disconnect the ignition cables and flame sensor wires from the ignitor assemblies
on each burner.

9. Remove the blower.

10. Lift the cookpot or rinse tank straight up and out of the cabinet.

11. Invert the cookpot or rinse tank on a suitable work surface and remove the salvageable

components (e.g., probe block assembly, drain plumbing, etc.). Install the recovered components
on the replacement cookpot or rinse tank, using thread sealer on all connections.

12. Reverse Steps 1 through 9 to complete the procedure.

Advertising