Furuno FELCOM 250 - Manual (Page 43)

3. SETTING AFTER INSTALLATION
37
3.5 Serial Port Setting
Set for the equipment that is connected to the RS-232C port.
1. Click Serial port in the Basic settings sub menu.
2. Select a baud rate from the Baud rate drop-down list. The selections are 9600, 19200, 38400,
57600 and 115200 bps.
3. Set a parity bit in the Parity box. The selections are None, Even and Odd.
4. Select the Flow control among Hardware, Software and None.
5. Click the Apply button to complete the setting.
Serial port