Maintenance and care – FORD 1998 Contour User Manual

Page 151

Advertising
background image

Maintenance and care

151

2. Remove the plastic caps from
the screws on the grille. Remove
the screws.

3. Open the hood. Pull off the
rubber weatherstrip at the back of
the engine compartment. Remove
the screws that hold the grille,
separate the two halves and
remove the grille.

4. The filter is in a housing at the
back of the engine compartment,
on the left side. Pull off the two
clips on the sides of the housing.
Slide out the housing and filter.

5. Slide the filter out of the
housing, replace with the new filter
and slide the housing and cabin air
filter back into place. Reinstall the
clips on the housing.

6. Replace the grille and wiper
arms.

CDW VA1-19Maint en C 5/15/97 8:56 PM Page 151

Advertising