7(gb) maintenance, Caring for your lawnmower q – Flymo GT500 User Manual

Page 9

Advertising
background image

7

(GB) MAINTENANCE

If you do not intend to use your
lawnmower for long periods it is
advisable to follow this procedure after
use:-

1.

Stop the engine.

2.

Close the fuel tap (Fig. H)

3.

Restart the engine.

4.

As fuel runs out the engine will begin to
stop, tilt the lawnmower. See Fig. N.

5.

Once the engine has stopped, release
the Operator Presence Control (A1).

6.

Disconnect the spark plug lead (A17).

7.

Remove all fuel from the fuel tank.

Cleaning

Keep your lawnmower clean - grass
clippings left in any of the air intakes,
around the engine or under the deck
could become a potential fire hazard.

Do not clean with chemicals,
including petrol, or solvents - some
can destroy critical plastic parts.

1.

Remove grass from under the hood with
a piece of wood or similar.

2.

Using a soft brush - remove grass
clippings from around the engine and
from all air intakes.

3.

Remove the fan, See 'Removing and
Fitting the Blade and Fan',
and clean
with a soft brush.

4.

Wipe over the surface of your
lawnmower with a dry cloth.

Caring for your Lawnmower

Q

At the end of the Mowing Season.

Ensure the Operator Presence Control is
released, wait until the blade has stopped
and disconnect the spark plug lead
BEFORE attempting any maintenance or
adjustment.

1.

Allow the engine to cool. Drain the fuel tank
(Fuel left in the engine becomes stale and
causes difficult starting)

2.

Remove the spark plug lead and spark plug.
Pour one teaspoon (5ml) of oil through the
spark plug hole. Pull the starting handle 2 or
3 times. This will distribute oil on the
internal surfaces of the engine. Inspect,
clean and replace the spark plug. If a new
spark plug is required contact your local
approved Service Centre/Dealer.

Do not re-connect the spark plug lead.

3.

Clean the air filter. See Engine Owners
Manual

4.

Renew the blade if it is cracked, damaged or
bent. Renew the blade bolt if necessary.
See 'Removing and Fitting the Blade and
Fan' for complete instructions.

5.

Use only genuine parts and accessories
specified for this product.

6.

Clean your lawnmower thoroughly. See
'Cleaning'.

7.

Your local approved Service Centre/Dealer
will carry out any service or repairs required.

8.

Store your lawnmower in a cool, dry, damp-
proof and safe place.

Carrying your Lawnmower

Never carry a lawnmower when it is running

Carry the lawnmower at the point of balance
with the blade facing away from you and the air
cleaner facing upwards. (See Fig Q).

Storing Your Lawnmower

Store in a cool, dry, damp-proof and safe place.
Service your lawnmower after the last cut of
the year as follows:-

Advertising