Fujitsu Siemens Computers 4612 FA - Manual (Page 26)

Color monitor 4612 FA
18 - English A26361-K628-Z100-1-5E19
Notes on ergonomic color adjustment
If you select colors for the display in your application programs, take note of the information below.
The primary colors blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colors for characters and background and giving the primary colors full
modulation, you can obtain very suitable color combinations (see the following table):
Background Characters
black white purple blue cyan green yellow red
black + + - + + + -
white + + + - - - +
purple + + - - - - -
blue - + - + - + -
cyan + - - + - - -
green + - - + - - -
yellow + - + + - - +
red - + - - - - +
+ Color combination very suitable
- Color combination not suitable because color locations are too close together, thin characters
are not identifiable or rigorous focusing is demanded of the human eye.
Removing the monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base:
1
2
1 = Covers 2 = Screws