FORD MONSTER TRACTION K8285 - Manual (Page 12)

K8285b-0920 12
• Fit the loops on grille support through the slots in the grille.
Push to "snap" the loops in place.
15
• Insert a screw through the large opening in the steering
column cap and the hole in the steering column.
Tighten the screw.
Grille Support
Loop
• Fit the pegs on the underside of the grille support into the
receptacles on the vehicle.
• Insert two screws into the grille support and tighten.
16
• Slide a rear wheel onto the rear axle.
Hint: Note the number on the inside of the wheel and on the
bottom of the vehicle near the rear axle. The rear wheel with a 1
should match the 1 on the vehicle and the rear wheel with a
2 should match the 2 on the vehicle.
17
Screw
Loop Slots
Screws
Rear Wheel Rear Axle
2
14