FujiFilm 1400 - Manual (Page 28)

55
4
2
This function allows you to select whether or not
the date of shooting is included on the print.
➀ Set the Mode Swich to “ D ”.
➁ Press the “MENU/EXE” button to display the
menu on the LCD monitor.
➂ Press “ dc ” button to select “ R DPOF”.
➀ Select “ T
DATE ”.
➁ Press “ d ”
or
“ c ” button to specify “DATE ON” or
“DATE OFF”. This setting is then valid for all
the prints until the setting is changed.
● ! Before specifying any other settings, first specify
whether date is to be shown or not.
● ! TRIMMING may not be displayed for some images
(
➡ P.58).
1
54
With the FinePix1400 ZOOM, you can order prints using the Digital Print Order Format
(DPOF).
You can use the DPOF to specify the following:
● The frames to be printed and the number of prints for each frame
● Imprinting of the date and time
This section gives a detailed description of how to order your prints with the FinePix1400
ZOOM.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
( ➡ P.79)
When you erase the image, the DPOF settings for that image are deleted at the
same time.
( ➡ P.79)
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
( ➡ P.79)
No more than 999 prints can be specified on the same SmartMedia.
➀ ➁
➂
➀ ➁
R HOW TO SPECIFY PRINT OPTIONS
PLAYBACK MENU
R DPOF DATE SETTING
PLAYBACK MENU