Mounting, Rack mounting, Mounting -3 – Foundry Networks 2402CF User Manual
Page 31: Rack mounting -3
M
OUNTING
February 2003
© 2003 Foundry Networks, Inc.
4-3
Mounting
A switch unit can be mounted in a standard 19-inch equipment
rack or on a desktop or shelf. Mounting instructions for each type
of site follow.
Rack Mounting
Before rack mounting the switch, pay particular attention to the
following factors:
•
Temperature:
Since the temperature within a rack assembly
may be higher than the ambient room temperature, check that
the rack-environment temperature is within the specified
operating temperature range. (See page -2.)
•
Mechanical Loading:
Do not place any equipment on top of a
rack-mounted unit
•
Circuit Overloading:
Be sure that the supply circuit to the
rack assembly is not overloaded.
•
Grounding:
Rack-mounted equipment should be properly
grounded. Particular attention should be given to supply
connections other than direct connections to the mains.
To rack-mount devices:
1. Attach the brackets to the device using the screws provided in
the Bracket Mounting Kit.