Focal DUAL MANAGER - Manual (Page 16)

5. Hints and tips
• Software error messages
“Amplifier is not connected. Program will be
started in demo mode.” Software will work in Demo mode.
“Can not find password. Program will be
terminated.” Password data are corrupted. Please, reinstall
program again.
“Hardware port error during waiting. Program
will be terminated.” Please, check hardware and drivers.
“Can not find amplifier in normal mode.
Program will be terminated.” Hardware in upgrade mode. Exit program. Power off/
on device. Start program again. Upgrade program
after new errors.
“Wrong password !” Administrator password is wrong.
“Password should contain from 3 till 25 characters !” Password range limitation.
“Wrong old password !” Wrong old password during password change.
“Firmware for devices is absent. Upgrade devices ?” Invitation to upgrade firmware.
“Amplifier is absent or firmware is broken. Try to
repair firmware ?” Device internal error. Answer yes if hardware is not
broken and properly connected and restart program
for further upgrade.
“Please, start program again.” Please, restart program.
“Can not find remote for upgrade. Program will
be terminated.” Please, connect remote for upgrade also.
“Database version is not correct.” Preset file was saved with another database structure.
You can see database version in automatically
created file name during file save.
“Not digit XXX ! Try again.” Edited parameter has incorrect format. Please follow
correct template for parameter.
“Frequency should be between 10 and 30000 Hertz.” Please, follow frequency range.
“Q should be between 0.10 and 9.00.” Please, follow Q range.
“Volume should be between +3.0 and -125.0.” Please, follow volume range.
16