First Alert INDOOR / OUTDOOR WIRELESS D575 - Manual (Page 11)

7
Setting Up Your
D575 Camera System
G
ENERAL
P
RECAUTIONS

Use only the power supply provided with the system.

Unplug the power supply when the system is not in use for extended periods.

Do not place any of the equipment near a radiator, vent, or other place where it
might be exposed to heat, moisture, dust, vibrations, or strong magnetic fields.

Do not attempt to repair the camera. Contact a qualified technician or the dealer for
service. Any change or modification may damage the equipment and invalidate the
warranty.

When installing the camera, follow manufacturer’s advice when using power tools,
steps, ladders, etc. and wear suitable protective equipment (e.g., safety goggles)
when drilling holes. Before drilling holes through a ceiling, check for hidden
electricity cables and water pipes
I NSTALLING THE C AMERA
1 Select the position for the camera and secure the camera stand.
Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.
2 Screw the camera onto the bracket.