Assembly, Track layouts – Fisher-Price MILE HIGH MOUNTAIN C6994 User Manual

Page 3

Advertising
background image

Load the crate into
the chalet.

Close the chalet door.

The crate tumbles out
the door at the bottom
of the mountain.

Assembly

MOUNTAIN TOP

SHORTEST

LONGEST

UPPER SPIRAL TRACK

TUNNEL TRACK SUPPORT

GUARDRAIL WITH TABS

LOWER SPIRAL
TRACK

• Fit the two mountain halves

together, as shown.

• Insert six screws into the

mountain assembly and tighten
the screws with a Phillips screw-
driver. Do not over-tighten.

• Locate the other guardrail

with the tabs.

• Fit a tab on one end of the

guardrail under the lower
spiral track, as shown.

• Bend the guardrail slightly

to fit the other two tabs to
the lower spiral track.

"Snap" the support pillars to
the underside of the spiral
track assembly, as shown,
working from the shortest
pillar to the longest.

• “Snap” the platform

with the fence onto the
mountain assembly .

• “Snap” the plain trees

into the mountain
assembly.

Slide the tab on the
upper spiral track into
the groove in the lower
spiral track to join the
two parts.

“Snap” the mountain
top onto the mountain
assembly.

“Snap” the plain
guardrail into the
slots in the upper
spiral track.

“Snap” the tunnel track
support to the tunnel.

“Snap” the snowy trees
and the chalet into the
mountain top.

#4 x

1

/

2

" Screw

• Fit the tabs on the upper

ramp into the slots in the
lower ramp.

• Insert two screws into

the upper ramp. Tighten
two screws with a
Phillips screwdriver.
Do not over-tighten.

1

3

5

6

8

9

10

7

4

2

PLATFORM
WITH FENCE

PLAIN GUARD RAIL

CHALET

SNOWY TREES

Track Layouts

Try making the suggested layout shown here.

#4 x

1

/

2

" Screw

Assembly is now complete!

UPPER RAMP

TAB

Track pieces easily snap together.

Set up this way to connect to
the Tracktown Railway

or

Cross Valley Junction

(each sold separately).

LOWER RAMP

1

2

3

Load the Crate!

The more you collect, the more
fun it gets!

Playsets and accessories sold separately and subject to availability.
Two of each Elevation Track Packs used to make this configuration.

Add the C6449 Elevation Track
Pack - Ramps (sold separately)
to build this layout and climb
to the top of the mountain.

For additional layout ideas,
visit the GeoTrax

section

of www.fisher-price.com

PLAIN TREES

Advertising