FUJITSU Printer - Manual

1
THERMAL PRINTER - OPERATING MANUAL
PC Device Port Set (Windows)
Procedure:
My Computer
Control Panel Open
System
Device Manager
Ports (COM & LPT)
Communications Port (COM1)
Port Settings
Bits per second 19200, 9600, 4800, 1200
Data bits 8, 7
Parity Even, odd, none
Stop bits 1
Flow control Xon, Xoff, Hardware (DTR/DSR)
PC Device Port Set (MS-DOS)
Procedure:
Case 1: Windows Prompt
Start
Programs
MS-DOS Prompt
C: \Windows> mode com1:19200, e, 8, 1
C: \Windows> copy <file name>com1
C: \WIndows >exit_______________< = to restart Windows
Case 2: MS-DOS
Start
Shut down
Restart the computer in MS-DOS mode?
Yes
C: \Windows> mode com1:19200, e, 8, 1
C: \Windows> copy <file name>com1
C: \WIndows >exit_______________< = to restart Windows
Note: If the data is large, send the data in Windows prompt mode, otherwise system will be
interrupted. In this case, use the actual MS-DOS mode (case 2).