Front Electronics PS6PMCM User Manual
Page 7
User’s Guide for Modem Charging Cradle PS6PMCM
7
Configuring the Network Manager for Modem
Communication
Perform the following steps:
1. Create a Point-to-Point Protocol (PPP) connection with a remote
computer by doing these steps:
•
On the
remote computer
, create a connection that will accept
incoming connections
.
•
Set the incoming connection device to
PC Modem
.
•
Verify that both, user information and permissions are correct.
•
Ensure that the
incoming connection
has a properly assigned
IP address.
2. Configure the Palm Tungsten E2 to work with the Modem
Charging Cradle:
•
Open
Preferences f
rom the Palm OS Main Menu.
•
Select
Communication Connection
.
•
Create a
new connection
using these settings:
−
Name:
Custom
−
Connect to:
Modem
−
Via:
Cradle/Cable
•
Select
OK
to save the new connection
•
Open
Preferences
from the Palm OS Main Menu
•
Select
Communication Network
then insert these settings
:
−
Service:
PSINet
−
User Name:
<Enter PC User’s Name>
who’s being
connected
−
Password:
<Enter same PC User’s Password>
−
Connection:
Custom
−
Phone:
<Enter Phone Number of Remote PC>