Festool Plunge Router I - Manual (Page 18)

Accessories
Guide Rail Attachment
The guide rail attachment is used to connect the router to
ail Attachment
3. Place the other guide block over the free end of the micro-
adjust thumbwheel. a Festool guide rail system for making straight cuts.
Assembling the Guide R
1. Before assembling the attachmen
rail gibs on both guide blocks.
18 OF 1400 EQ Router
t, adjust the guide
b. Tighten the two adjustment screws until the block
s freely.
a. Place the block on one of the ribs of the guide rail.
fits snuggly to the rib but still move
2. Thread the micro-adjust thumbwheel into either one
of the two guide blocks.
4. Insert the two guide rods through both guide blocks. Make