FujiFilm 40002 User Manual
Page 26
3. INSTALLATION
24
5.
Select
[Network Printer], and then click the [Next] button.
The
[Locate Your Printer] dialog box is displayed.
6.
Select
[Type the printer name, or click Next to browse for a
printer].
Enter a network path in the
[Name] field, or click the [Next]
button without entering anything.
If you enter a network path, specify the server on the network
and its share name. For example, if the server computer is named
"SERVER" and the share name for the PICTROGRAPHY is
"PICTRO", enter the following:
\\SERVER\PICTRO
If you entered nothing in the
[Name] field, the following screen
is displayed:
Note the
[Shared Printer] field that displays the names of the
computers connected to the network. Double click the name of
the server computer, and then select a share name for the printer.
This selection sets that network path in the
[Printer] field.
After confirming that the network path has been set in the
[Printer] field, click the [Next] button.
7.
The following screen is displayed.
8.
Select
[Yes] or [No], and then click the [Next] button.
The following screen is displayed.