Battery installation – Fisher-Price BUTTERFLY DREAMS C0108 User Manual

Page 5

Advertising
background image

Mobile Base
• Locate the battery compart-

ment door on the back of the
mobile base.

• Loosen the screws in the battery

compartment door with a Phillips
screwdriver. Remove the battery
compartment door.

Hint: If the crib adaptor is attached to
the base, loosen the screws in the crib
adaptor and remove it first.
• Insert four “D” (LR20) alkaline

batteries.

Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compart-

ment door and tighten the screws
with a Phillips screwdriver. Do not
over-tighten.

IMPORTANT! Under normal use
conditions, the batteries in the mobile
will require replacement more often
than the batteries in the remote.
When sounds or light become faint or
movement of the mobile is sluggish,
it’s time for an adult to replace the
batteries in the mobile base.

Remote
• Locate the battery compartment

door on the back of the remote.

• Loosen the screw in the battery

compartment door with a Phillips
screwdriver. Remove the battery
compartment door.

• Insert two “AA” (LR6) alkaline

batteries.

Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compart-

ment door and tighten the screw
with a Phillips screwdriver. Do not
over-tighten.

IMPORTANT! If the mobile does not
respond to the remote, it does not
mean that the battery power in the
remote is low. Replace the batteries in
the remote if the LED signal indicator
on the remote is dim when the
button is pressed. If the LED signal
indicator does not light after installing
new batteries in the remote, check the
orientation of the batteries in the
battery compartment to make sure
they are properly installed.

Battery Installation

5

Mobile Base

Remote

Battery

Compartment

Battery

Compartment

Advertising