FUJITSU MB15F74UV - Manual (Page 23)

MB15F74UV
23
■ ■ ■ ■ USAGE PRECAUTIONS
(1) V
CCRF
and V
CCIF
must be equal voltage.
Even if either RF-PLL or IF-PLL is not used, power must be supplied to V
CCRF
and V
CCIF
to keep them
equal. It is recommended that the non-use PLL is controlled by power saving function.
(2) To protect against damage by electrostatic discharge, note the following handling precautions :
•
Store and transport devices in conductive containers.
•
Use properly grounded workstations, tools, and equipment.
•
Turn off power before inserting or removing this device into or from a socket.
•
Protect leads with conductive sheet, when transporting a board mounted device
■ ■ ■ ■ ORDERING INFORMATION
Part number Package Remarks
MB15F74UVPVB
18-pin plastic BCC
(LCC-18P-M05)