Recall, Maintenance – Fluke 922 User Manual
Page 27
Advertising
Airflow Meter
Recall
19
3.
Press
I
to clear all samples. The Meter beeps and the display shows 0 samples.
4.
To exit (CLEAR) or (CLEAR ALL) without deleting samples, press
P
,
V
, or
F
before pressing
I
Recall
1.
Press either
P
,
V
, or
F
to recall samples for that mode.
2.
Press
A
.
3.
Press
I
(RECALL) to recall samples. Use
D
and
E
to locate the desired
sample. Hold
E
or
D
to increase the rate of change.
4.
Press
P
,
V
, or
F
to exit the Recall menu.
Maintenance
This section provides basic maintenance information, including battery replacement
instructions.
W
Caution
Do not attempt to repair or service the Meter unless qualified to do so and
have the relevant calibration, performance test, and service information.
Advertising