Freecom Technologies WSXGA 220AW8FB - Manual (Page 6)

Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro
EN
1
6
Chapter 1: Start Up
1.1 Hardware installation
Since USB .0 is backwards compatible with USB 1.1, the Freecom Blu-ray
Rewriter Pro / Blu-ray Combo Pro can be connected to all USB ports. When
connected to a USB 1.1 port, however, the performance (data transfer rate) of
the Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro will be much lower
than when the drive is connected to a USB .0 port.
1. Connect the interface cable (USB or Firewire) to the
Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro.
2. Connect the cable of the power supply to the Freecom
Blu-ray Rewriter Pro / Blu-ray Combo Pro and the power
supply itself to the socket.
3. Connect the interface cable (USB or Firewire) to the
interface port (USB or Firewire) of your computer.
4. Switch on the Freecom Blu-ray Rewriter Pro / Blu-ray
Combo Pro.