FireplaceXtrordinair 4915 - Manual (Page 2)

Illuminations 4915 Stone/Frosted Sleeve
Installation Instructions
(Stone 95000962, Frosted 95000963)
Page 2 of 3 17601567 - 1/14/09 © Travis Industries, Inc.
Installation
1 Install the candle sleeves on the letter A and I candles first. These sleeves consist of two pieces and require
you to place the smaller piece on first then tilt the candle tray forward to install the taller piece (see Figure 2).
Do not pull on the bulb or bulb base. Tilt the tray by pulling forward on the threaded candle base. The
remaining sleeves may be installed with the candle tray in place. Take care to prevent damage to the candle
bulbs (see Figure 3).
Figure 2 Figure 3
2 Install the number 1 and 9 cylinders first. For these two cylinders you will need to tilt the candle tray
forward, just as you had done for the candle sleeves (see Figure 4). Place the remaining cylinders in
place, taking care to prevent damage to the candle bulbs (see Figure 5).
Figure 4 Figure 5