J increasing monitor brightness, Increasing the lcd monitor brightness – FujiFilm F45fd User Manual
Page 65
65
Advanced Features —
Photography
j Increasing Monitor Brightness
Use this function to increase the brightness of the LCD
monitor temporarily when you have difficulty seeing the
monitor in low-light conditions or in daylight.
Increasing the LCD monitor
brightness
Press j (n) to display the LCD monitor brightly.
Press j (n) again to return to normal LCD monitor
brightness.
CAUTION
Increasing Monitor Brightness cannot be set when
POWER MANAGEMENT (
➝p.69) in the p-MODE
MENU is set for
CLEAR DISPLAY.
MEMO
• This function is automatically canceled after each shot.
• This function is purely for checking the composition of
your shot. It does not increase the brightness of the
image.
• Even if you increase the brightness in low-light
conditions, you cannot check the subject.
blinks on the LCD monitor
when the function is on.
1 / 24 / 2007 10:00 AM
1 / 24 / 2007 10:00 AM
1 / 24 / 2007 10:00 AM
1 / 24 / 2007 10:00 AM