FUJITSU fi-5220C - Manual (Page 18)

10
2. Click [INSTALL PRODUCTS].
3. Click [QuickScan PRO (Trial)] on the window
below.
4. Continue to install the application following the
instructions on the window.
5. Enter the required information, then click [Next
>] button.
6. Install the application following the instructions
on the window.
■ Confirming Installation
1. Load the documents on to the scanner.
For details on loading documents, refer to "1.2
Loading Documents on the ADF for Scanning" in
the fi-5120C/fi-5220C Operator’s Guide on the
Setup CD-ROM.
2. Start QuickScan Pro™.
From the [Start] menu select [Programs]-[Quick-
Scan]-[QuickScan].
3. Select [Select Scanner...] from [Scan] menu in
QuickScan Pro™.
And select fi-5120C/fi-5220C from the list of
[Scanner:], and then click the [OK] button.
ATTENTION
"QuickScan Pro™" included in the Setup
CD-ROM is a Trial version. For further use
after the expiration of its evaluation period
of up to 30 launches, it is necessary to pur-
chase a fully functional version of Quick-
Scan Pro™. (When you install the
evaluation version, do not change the
Serial Number already displayed.)