Furuno RD-30 User Manual
Airmar
Connecting a PB1
50 WeatherStation to a
Furuno RD-30 Display and/or Combiner
This guide contains supplementary instructions for connecting an Airmar PB1
50
WeatherStation to a Furuno RD-30 display. Use these instructions along with the
owner’s guides that came with the WeatherStation and the RD-30.
There are three ways to connect a WeatherStation to an RD-30 display.
• Connect directly
• Connect through a Combiner
• Upgrade a direct connection with a Combiner
Connecting a Combiner enhances the RD-30 system making it a mini-display
network. By adding a Smart™ Sensor, the system becomes a complete auxiliary
navigation suite. With this advanced system, WeatherStation and Smart Sensor
data can be displayed simultaneously at multiple stations. The user can
communicate with the Weatherstation via the included WeatherCaster PC
software. And the software can be customized to meet the user’s need (see
NMEA 0183 Sentence Commands
on page 3).
Connecting Directly to an RD-30 Display
CAUTION
: When powering PB1
50 directly from RD30, ONLY use 12VDC for RD30
Power! Do not operate the PB1
50 at voltages above 16VDC!!!!
The WeatherStation can be connected directly to the AUX port of the RD-30 using
the cables supplied (see Figure A).
The WeatherStation will receive power from the RD-30 through the RD-30’s AUX
port. Power the RD-30 using its supplied data/power cable.
IMPORTANT
: Before the WeatherStation will work, the RD-30’s output power on
the AUX port must be enabled. The keystrokes are
[MENU] - [I/O SETUP] - [POWER OUT] - [ENT] - Select [ON].
Note
: Multiple RD-30 displays can be daisy-chained together, as described in the
Furuno operator’s manual. In this case, the WeatherStation must be connected to
the last RD-30 in the chain.
Figure A. Connecting to an RD-30
Furuno
RD-30
Copyright © 2006 Airmar Technology Corp.
Weather
AUX
IN/OUT
Furuno
WeatherStation
cable
DC power
cable
Station
CAUTION: 12VDC only
Copyright © 2006, 2007 Airmar Technology Corp. All rights reserved.
AIRMAR
®
TECHNOLOGY CORPORATION
35 Meadowbrook Drive, Milford, New Hampshire 03055-4613, USA
www.airmar.com
Where to Buy Parts
Furuno USA
Tel:
360.834.9300
Fax:
360.833.5195
Gemeco (USA)
Tel:
843.394.3565
Fax:
843.394.3736
email:
Airmar Europe
Tel:
+45.45.81.04.18
Fax:
+45.45.81.04.93
email:
4
17-443-01 rev. 04
08/22/07