FEIN Power Tools 9-55-13 - Manual (Page 5)

2
SUCTION OF DRY DUST AND DIRT
The cloth filter that came with your FEIN Turbo II will contain extracted dust 5.0
microns in size and larger. If picking up fine dust, you will need to use a pleated filter
cartridge and paper bag, which can be purchased as a (FBK) kit or a (FBK-HEPA)
kit for hazardous dust vacuuming. (see page 6 for kit contents).
5
Do not use vacuum without a filter. Use the cloth
filter that came with your vacuum, or a pleated
filter. Do not use both at the same time. Failure to
use a filter when dry vacuum cleaning will damage
the motor. NEVER USE VACUUM CLEANER
WITH A WET FILTER CARTRIDGE FOR DRY
VACUUM CLEANING. It quickly becomes clogged
and unusable.
SUCTION OF FLUIDS
b) In order to guarantee enough air flow, it is recom-
mended that accessories not be completely immersed
into the fluids.
SUCTION OF DRY DUST AND DIRT (continued)
(continue on page 5)
c) When the fluids have reached the highest permitted
level in the tank, the float regulator F automatically
blocks suction and the motor gets noisier. Switch the
vacuum off IMMEDIATELY, pull out the plug,
remove the suction head from the tank and empty the
tank.
a) First, remove any dirt and dust residue from
previous cleaning operations from the container.
Remove the cloth filter or the cartridge filter G and
replace it with the anti-foam filter R . DO NOT USE
THE CLOTH FILTER, THE CARTRIDGE FILTER
OR THE PAPER DUST BAG DURING THE
SUCTION OF FLUIDS.
b) In order to remove the filter cartridge turn the
screw I quarter turn counterclockwise and pull out
the filter cartridge.
ATTENTION: If suction pressure decreases, replace
the paper dust bag H with a new one. From time to
time the filter cartridge G should be cleaned with a
soft brush, ensuring longer life and higher perfor-
mance.
c) Fix the optional paper dust bag H to the inner
side of the tube-connection in the receptacle: fig.c.
and d. When using this paper dust bag the dirt can
be removed more hygienically and the life of the filter
cartridge will be increased. The paper dust bag H
should be used with the filter cartridge; it should
NEVER be used by itself or with the cloth filter.
a) To install the optional filter cartridge G place the
turn screw I inside the flange K . Place the filter
cartridge on the float cage then put the flange assem-
bly on the bottom of the filter. Turn the screw quarter
turn to lock the filter on.