Fisher FVH-T619 - Manual (Page 39)

COPYING A TAPE
You can copy recordings (such as home videos) from one
tape to another using two VCRs.
1 Connect the VCRs as shown.
2 Insert the recorded cassette into VCR 1.
3 Insert a blank tape into VCR 2.
4 Set the desired recording speed on VCR 2.
5 Turn on the TV and set it to channel 3 or 4.
If you use this model as VCR 2 to record:
œ Press the INPUT button on VCR 2 to select the rear
input jacks.
The AV indicator “L1” is displayed instead of a channel
number.
NOTE: When using the front AUDIO/VIDEO input jacks,
press the INPUT button until the AV indicator “L2” is
displayed.
6 Press the TV/VCR button on VCR 2 to select the
VCR mode.
7 Place VCR 2 in the record/pause mode.
8 Press PLAY on VCR 1.
9 When the tape in VCR 1 has reached the desired
point, press (release) PAUSE/STILL on VCR 2.
Recording begins.
F Press STOP (or STOP/EJECT on the front panel) on
both VCRs when finished.
MAINTENANCE
Head Care and Cleaning
œ Under normal conditions, the heads should not require
cleaning. If you suspect a problem, contact a
factory-authorized service center.
Cabinet Cleaning
œ Clean the outside of the cabinet with a clean, soft cloth,
moistened with lukewarm water and wrung dry.
DO NOT USE SOLVENTS OR OTHER TYPES OF CLEANSERS. THESE CHEMICALS CAN CRACK OR
DISCOLOR THE CABINET.
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
TO TV
OUT
IN OUT
VCR 1: To play back VCR 2: To record
Audio connection cable
(not supplied)
Video connection cable
(not supplied)
TV
SU4H/UF2 (FVH-T619 GB) Tue. Mar. 09/1999
39