Т³гж 14, Replacement instructions, Replacing the flat belt – Fantom Vacuum FM655CS User Manual

Page 15

Advertising
background image

Place a new flat belt onto the motor shaft and pulley.

1
2

3

4

5

Bearing Holder

Groove

Nozzle Head

REPLACEMENT INSTRUCTIONS

Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the

power cord from the wall outlet before replacing any of the parts below.

REPLACING THE FLAT BELT

Remove the bottom plate.
(refer to page 14)

Lift out the agitator assembly,and then remove the flat belt from the motor shaft and

the agitator pulley.

Place the agitator assembly into the grooves in the nozzle head, making sure that the new
flat belt slides securely into the guide.

Caution:
Install the flat belt so that it has no
twists in it,and so that all components
turn smoothly.

Reattach the bottom plate
(refer to page 14)

13

Motor Shaft

Flat Belt

Pulley

Flat Belt

Agitator Assembly

Motor Shaft

Flat Belt

Advertising