Fishman Aura Jerry Douglas Signature Series - Manual (Page 16)

16
Power
Power may be supplied by either a 9V battery (battery compartment under
pedal) or an approved 9V adapter. Insert a plug into the input jack, and the Aura
Imaging Pedal powers up. To conserve the battery, remove the plug from the
input when not in use.
For AC power, use the Fishman 910-R (for 110V) or other suitable 9V adapter. The
adapter must be fi ltered, regulated and rated for at least 200mA. It should also
accept AC power appropriate for your country. Power Plug requirements: 5.5mm
O.D., 2mm I.D., tip = negative.