Fender Band-Master VM 212 Enclosure User Manual
Band-Master™ VM 212 Enclosure
Band-Master™ VM 212 loudspeaker enclosure is the
perfect companion to the
Band-Master™ VM head or other
quality tube amplifier.
• Premium 3/4" Birch Ply construction for resonant tone
• Two Celestion® G12P-80 speakers for tight bottom end and rich highs
• 160 Watt power handling
• 8 Ohm impedance
The World's Most Popular Instrument Amplification
Use speaker cable (16-gauge minimum) with standard
1/4" plugs to connect each Band-Master VM 212 enclosure to a
1/4" speaker output jack on your amplifier.
∆ Caution—Only connect a speaker load that complies with
minimum impedance and maximum power
∆ Caution—Fender® amplifiers and loudspeaker systems are
capable of producing very high sound pressure levels which
may cause temporary or permanent hearing damage. Use
care when setting and adjusting volume levels during use.
Two, 12" (30.5 cm) Celestion® G12 P-80 speakers, with 1.75" (4.4 cm) voice coils and 31 oz (879 gm) magnets
1/4" high current phone jack
HEIGHT: 20.88 in (53 cm)
WIDTH: 32 in (81.3 cm)
DEPTH: 12 in (30.5 cm)
48 lb (21.8 kg)
Product specifications are subject to change without notice.