Fisher-Price M6711 - Manual (Page 4)

4
Assembly
• While standing on the base tube, pull the front legs up. The
front legs should remain secured to the base tube. If you
can remove the front legs, you have not assembled them
correctly to the base tube. Re-read and repeat assembly
step 2.
Base Tube
3
PULL UP
• While pressing the buttons on each back leg, insert the
back legs into the remaining base tube.
• Push the back legs down into the base tube until the
buttons “click” into place.
Base Tube
Press Buttons
on Back Legs
4
• While standing on the base tube, pull the back legs up.
The back legs should remain secured to the base tube.
If you can remove the back legs, you have not assembled
them correctly to the base tube. Re-read and repeat
assembly step 4.
Base Tube
5
PULL UP
• Position the seat frame so that the tubes are upright,
as shown.
• While gently pulling the seat hubs out, fit them to the
matching frame hubs.
Hint: If the hubs do not fit together, simply turn the seat
frame around and try again!
Frame Hubs
Seat Frame Seat Hubs
6