Meridian Audio Stereo System - Manual (Page 23)

� ����� ���� ����� ����� ����� ����� � � �
��
����� ������
�
���������
Band and Frequency (AM/FM) or bit rate (DAB) Station name (if available) Stereo and preset station
U s i n g t h e
r a d i o t u n e r
1 8
Home Selecting a station
This section gives information about using the DAB/FM or
AM/FM radio tuner. It explains how to select stations, change the
waveband, and step between preset stations. • Press Home when the Radio source is selected to display the
soft keys for selecting stations.
Radio
To select the radio
tuner
• Press Home to
display the source
options.
• Press Radio to select
the radio tuner.
Select station
To select the next
station
• Press V or A.
DAB band
The tuner will select the
previous or next service,
in alphabetical order.
FM/AM band
The tuner will scan
down or up in frequency
until it finds the next
station.
On FM, if the station
supports RDS the
display will show the
station name:
���������
Band
To change the band
• Press Band.
You can switch between
the following bands:
DAB/FM tuner
FM (VHF)
DAB
AM/FM tuner
FM (VHF)
MW (Medium Wave)
LW (Long Wave)
AM/FM tuner (USA)
FM (VHF)
AM
Step Previous/Next
To step between preset stations
• Press [ or ].
Alternatively enter the preset station number using
the remote.
The display shows the frequency and preset station
number:
��������
2
or, if a name has been stored for the preset station,
the preset station name:
���������
For information about defining preset stations, see
Tuning manually and defining preset stations , page
19.