Fonexion FX30 - Manual (Page 3)

Package Contents
FX30 Bluetooth Headset
USB Charger
Inter-Changeable panel
User manual
Quick Start guide
1. Fully charge your FX30
The FX30 headset comes with a built - in rechargeable battery. We recommend that you charge the battery until the headset indicator turns off
before using the headset for the first time. During charging, the indicator light shows a steady red light and the headset is turned off. When the
battery is fully charged, the indicator will be off. It takes 3 to 3.5 hours to fully recharge the battery. Always use the manufacturer’s charger.
2. Switch on the Headset.
Press and hold the MFB (around 5 seconds) in power off mode until LED flashes 3 times and you hear 2 short beep tones. The headset is then on.
To turn the headset off press and hold the MFB (around 4 seconds) until the LED flashes 3 times and you hear 2 short beep tones. The LED will
turn off and the headset is then off.
3. Pairing the FX30 headset with a phone
a. Prepare your phone according to the phone's user manual on pairing.
b. Press MFB button for up to 8 seconds until the indicator light on the headset flashes blue and red alternatively. The FX30 is now in
pairing mode.
c. Continue according to the instructions in the phone's user manual and press yes or OK when asked if you want to pair the phone with
the FX30.
d. Enter passkey “0000” then press Yes or OK.