Furuno PP-505 - Manual (Page 7)

OPERATION
2
Changing the mode
Press the [MODE] key to change the printing
mode from depth graph to log printing
alternately.
The printing interval setting is printed
whenever the [MODE] key is pressed.
Changing the printing interval
Press the [INTERVAL] key to choose printing
interval.
Depth graph: 9 s
→
45 s
→
90 s
→
450 s
Log: 10 s
→
30 s
→
1 m
→
10 m
The latest data of the printing interval is
printed.
When the printing interval is changed, the
printing interval setting is printed and marked
with an asterisk.
Note: You can skip over setting(s) by
pressing the key consecutively within
one second.
Changing the depth range
Press the [RANGE] key to change the depth
range.
When the depth range is changed, the depth
is printed and marked with an asterisk.
Range: 5 m
→
10 m
→
20 m
→
40 m
→
100 m
→
200 m
→
400 m
→
800 m
Note1: Depth range automatically changes
depending on the depth range on the
navigational echo sounder.
Note2: You can skip over setting(s) by
pressing the key consecutively within
one second.
Feeding the paper/Printing the marker
To feed the paper, press and hold down the
[FEED/MARK] key.
Press the [FEED/MARK] key momentarily to
print the marker.
1.3 Turning on the Power
Flip down the thermal paper cover and turn
on the [POWER] switch. The PP-505 then
carries out the diagnostic test. After the test
has been completed, the printer is ready to
print depth data.
Note: “Disconnect” is printed if data from the
navigation echo sounder is not being
received during printing or the
navigation echo sounder is displaying
the system menu.
To turn off the power, press the [POWER]
switch.