FilterStream V2210 - Manual (Page 14)

14
H O W T O U S E
Remove your vacuum from the Charging Base
and slide the On/Off Switch to the “On”
position to operate. Slide the On/Off Switch to
the “Off” position between cleaning tasks to
conserve power.
PICKING UP DRY DEBRIS
Use your vacuum for picking up dirt, dust, food
crumbs, etc. from counters, bare floors, rugs,
automobile interiors, upholstered furniture, etc.
After dry pickups, empty and clean the Bowl and
Foam Filter before picking up liquid or wet spills.
Note: If using a HEPA Filter in place of the Foam
Filter, shake loose, or brush off any dust or debris
from the HEPA Filter if you notice any build-up.
DO NOT WASH OR RINSE THE HEPA FILTER,
as this may damage the HEPA material.
If the HEPA Filter accidentally gets wet from
vacuuming wet spills, remove the HEPA Filter,
pat it dry with a paper towel, and allow it to
thoroughly air dry before next use.
PICKING UP LIQUIDS OR WET DEBRIS
Use your vacuum to pick up liquids or wet debris.
For ideal performance, we recommend the use of
the Foam Filter for liquid debris.
(a) For liquid pickups, insert the Squeegee into
the Bowl Nozzle and pull the Squeegee
through the liquid.
(b) Do not fill the Bowl beyond the end of the
Pre-Filter (about 9 oz. of liquid). If there is any
liquid in the Bowl, hold the Bowl Nozzle down
to avoid leakage. Tipping the Bowl Nozzle up
may cause the liquid to enter the fan area.
(c) After picking up
perishable spills (e.g.
milk, juice, etc.),
empty your vacuum’s
Bowl and Pre-Filter
immediately and
thoroughly clean the
Bowl, Pre-Filter, Filter
Cover and Foam Filter
to prevent mold and
mildew from forming.