Precautions – FUNAI DP100HH8A User Manual

Page 4

Advertising
background image

– 4 –

EN

PRECAUTIONS

TO AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE

Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it
from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.

LOCATION AND HANDLING

Do not install the unit in direct sunlight, near strong
magnetic fields, or in a place subject to dust or
strong vibration.
Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position.
Do not place anything directly on top or bottom of
the unit. Depending on your external devices, noise
or disturbance of the picture and/or sound may be
generated if the unit is placed too close to them. In
this case, please ensure enough space between the
external devices and the unit.
Depending on the environment, the temperature
of this unit may increase slightly. This is not a
malfunction.

TRADEMARK INFORMATION

Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.

Product that have earned ENERGY STAR

®

are designed to protect the environment
through superior energy efficiency.

is a trademark of DVD Format/Logo

Licensing Corporation.

DEW CONDENSATION WARNING

Dew condensation may form inside the unit in the
following conditions. If so, do not use this unit at
least for a few hours until its inside gets dry.
- The unit is moved from a cold place to a warm

place.

- Under conditions of high humidity.
- After heating a cold room.

NOTE ABOUT RECYCLING

This unit’s packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.

SYMBOLS USED IN THIS MANUAL

The following symbols appear in some headings in this
manual.

: Description refers to DVD-video.

: Description refers to audio CD.

: Description refers to CD-RW/-R with MP3 files.



MAINTENANCE

Servicing

• Please refer to relevant topics on the “Troubleshooting

Guide” on page 17 before returning the unit.

• If this unit becomes inoperative, do not try to correct the

problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
authorized service center.

Cleaning the Cabinet

• Use a soft cloth slightly moistened with a mild detergent

solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning cloth.

Wipe the disc from the center to out. Do not wipe in a
circular motion.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.

Cleaning the Disc Lens

• If this unit still does not perform properly although you refer

to the relevant sections and to “Troubleshooting Guide” in
this owner’s manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center
for inspection and cleaning of the laser optical pickup unit.

Disc Handling

• When you handle a disc, hold it by its edge and try not to

touch the surface of the disc.

• Always store the disc in its protective case when not in

use.

© 2008 Funai Electric Co., Ltd.

All rights reserved. No part of this manual may be
reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form
or for any purpose without the express prior written consent
of Funai. Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto is strictly
prohibited.

Information in this document is subject to change without
notice. Funai reserves the right to change the content
herein without the obligation to notify any person or
organization of such changes.

with the

design is a registered trademark of

Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other
trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this
manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks
displayed herein. Misuse of any trademarks or any other
content in this manual is strictly prohibited. Funai shall
aggressively enforce its intellectual property rights to the
fullest extent of the law.

E6KPTUD_DP100HH8 A.indd 4

E6KPTUD_DP100HH8 A.indd 4

2008/01/08 14:13:04

2008/01/08 14:13:04

Advertising