Franklin SCQ-106 - Manual (Page 12)

11
Using a Password
You can use a password to keep the information
in your phone list private. Your password will be
requested whenever anyone turns on the unit
and presses
PHONE
.
Warning! After you have set the password, you
will not be able to see or use your phone list with-
out it. So always record your password and keep
it in a separate place.
1. Press
PHONE
.
2. Use to see Set the password and then
press
ENTER
.
3. Type a password and then press
ENTER
.
Remember to write down your exact password
and keep it in a separate place. Your pass-
word can have up to 23 characters.
4. To test the password, press
ON/OFF
, type the pass-
word, and then press
ENTER
to gain access.
5. To disable the password, repeat Steps 1
and 2 above, and then press
ENTER
when
Enter password appears.
✓ About Automatic Shutoff
If you forget to turn off this product, it will au-
tomatically turn off in about two minutes.
When you turn it on again, operation
resumes with your current settings.