Fisher-Price MUSTANG J4390 - Manual (Page 15)

15
J4390pr-0922
ASSEMBLY
• Fit the fastener cap
onto the end of the
steering column.
• Insert a #8 x 3 /
4
"
screw through the
large opening in the
fastener cap and into the hole in the steering column.
Tighten the screw.
• Turn the vehicle upright.
23
• Position the steering wheel so that the large opening is UP.
• Fit the steering wheel onto the steering column.
24
• While pressing down on the steering wheel, grasp the steering
column under the dash and pull it up as far as it will go.
• Insert the 5 /
32
" x 1 1 /
2
" pin through the hole in the steering column.
• Grasp the steering column again and pull down to fit the pin
into the center of the steering wheel.
25
• Fit the steering wheel cap onto the center of the steering wheel.
• Insert two #8 x
3 /
4
" screws and tighten.
26
Steering Wheel Cap
Fastener Cap
Large Opening
Steering Column
Steering Wheel
Lift Steering
Column
Press Wheel