FUNAI FDP-100 - Manual (Page 37)

37
Appendix
[ERROR] Lamp
The [ERROR] lamp lighting indicates the following
probable causes.
‹ About the paper:
z Paper jam has occurred.
z The Paper tray is not set.
z There is no paper in the Paper tray.
z Specified paper is not set in the Paper tray. (Set the
paper supplied with the Ink cartridge.)
‹ About the Ink cartridge:
z The Ink cartridge is not set.
z The Ink ribbon in the Ink cartridge has been
consumed.(The [ERROR] lamp flashes.)
Other paper errors z More than 2 sheets of paper are sent inside
of the printer at a time as the paper sticks
together and like that. Turn off the printer and
turn on again, so the paper is discharged
from the printer.
z Paper jam has occurred. Turn off the printer
and turn on again, so the paper is discharged
from the printer.
40
File error z The printer failed to get DPOF setting
information. Check if the DPOF settings are
correctly configured.
z An image that is not supported by the printer
is tried to be printed.
-
Monitor Display Examples Status of the Printer/Solution Page
POWER POWER ACCESS ACCESS ERROR ERROR