Assembly – Fisher-Price 79652 User Manual

Page 6

Advertising
background image

Assembly

6

• Fasten the pad fasteners to the base fasteners.
• Lift the canopy.
• Attach the toys to the canopy fasteners.
IMPORTANT! Assembly is now complete, but Bounce ‘n Play
Activity Dome is not ready for use. Please refer to the Use
instructions, on this page, beginning with step 2.

®

Pad
Fastener

Toys

Canopy
Fasteners

9

• Position one end of the metal canopy stay against the

upper hole in a frame.

• Insert an M5 x 1

13

/

16

" screw through the hole in the cover.

• Fit the end of the screw through the hole in the metal

canopy stay and into the upper hole in the frame.

• Push on the cover to insert and “snap” the tab on the cover

into the slot in the frame. Make sure you hear a “snap”.

• Fit an M5 lock nut (with the rounded side toward the

fabric) into the upper hexagonal opening on the back
of the frame.

• Tighten the screw with a Phillips screwdriver. Do not

over-tighten.

• Repeat this procedure to attach the other end of the metal

canopy stay and the remaining cover to the frame on the
other side of the base.

Upper
Hole

Cover

Slot

Tab

Metal Canopy Stay

M5 x 1

13

/

16

" Screw -2

M5 Lock Nut -2

Rounded
Side

8

Advertising